Breckland Beira, 2009
<Click the picture to enlarge>
Norfolk-based Breckland - part of Hong Kong-based multi-national, Riche Holdings - is vastly experienced in the development and production of high-quality, low volume specialist cars and prototypes for an array of prestigious international clients, including Mosler, and has now employed its substantial skills in the making of its own limited-production supercar.
The Breckland Beira is a hand-built, two-seat roadster with unique styling cues, tuned to produce just a whisper short of 400bhp.
Tipping the scales at some 1,400kg, the Beira's impressive power-to-weight ratio ensures invigorating performance, with the promise of a sub-five second sprint to 100kph, coupled with tremendous torque and a governed top speed of 155mph.
Beira dynamics
Breckland Beira is based on the well-developed General Motors Kappa platform, on sale in the North American market.
Breckland Beira differs in many significant respects from the GM products however, the most radical departure being the installation of the potent, 6.0-litre, LS2 V8 engine, more commonly found in Corvette and Pontiac GTO models. It replaces the four-cylinder Ecotec engine and, by comparison, produces more than twice the power of the original unit.
The mighty, fuel-injected, aluminium V8 and Tremec six-speed manual gearbox are neatly packaged under the Beira's swooping bonnet, with a bespoke wiring harness and ECU, the latter being reprogrammed to allow the V8 to deliver close to 400bhp, combined with a dual-fuel capability.
Other key considerations involved significant attention to chassis dynamics, to ensure the car corners, steers and brakes effectively with the significant increase in engine output.
To satisfy this requirement, the fully independent suspension was entirely re-engineered by Breckland in association with KW Suspension, with uprated springs, dampers and bushes, plus thicker anti-roll bars front and rear. The result is slightly less suspension compliance, but a more focused ride and handling.
Stopping power is provided by impressive, 325mm ventilated discs on all four corners, the fronts being grasped by six-pot callipers, with four-pot at the rear, both from UK specialists, HiSpec.
Steering is via power-assisted rack and pinion, whilst the dramatically styled 18" cast alloy wheels are 8.5" front and 9.5" rears, shod with Bridgestone ultra-low profile tyres. Customer options include an upgrade to 19" diameter rims and tyres.
Exterior packaging
In order to make the Breckland Beira eye-catchingly different, save weight and liberate additional luggage space behind the passenger compartment, Breckland's design engineers have totally re-modelled both the front and rear body sections in-house, using lightweight composites instead of steel, the result being a highly distinctive nose section and pronounced fastback rear.
Bespoke interior
Breckland Beira features a custom-built interior, including electric windows, air conditioning, twin airbags - in the steering wheel and in the passenger dash - combined with clear, concise instrumentation, and hand-stitched leather/Alcantara seats and trim.
Affordability
The Breckland Beira is designed very much as a high-quality low-volume, sportscar for enthusiasts, and follows the highly appealing tradition of installing an easily available, American-designed V8 engine in a small, nimble, two-seater chassis to produce an exhilarating, high-performance package. Though using a tried and trusted concept, however, Beira is very much a vehicle for the 21st century, and accomplishes this with both environmental and fuel efficiency concerns in mind.
The Breckland Beira is a hand-built, two-seat roadster with unique styling cues, tuned to produce just a whisper short of 400bhp.
Tipping the scales at some 1,400kg, the Beira's impressive power-to-weight ratio ensures invigorating performance, with the promise of a sub-five second sprint to 100kph, coupled with tremendous torque and a governed top speed of 155mph.
Beira dynamics
Breckland Beira is based on the well-developed General Motors Kappa platform, on sale in the North American market.
Breckland Beira differs in many significant respects from the GM products however, the most radical departure being the installation of the potent, 6.0-litre, LS2 V8 engine, more commonly found in Corvette and Pontiac GTO models. It replaces the four-cylinder Ecotec engine and, by comparison, produces more than twice the power of the original unit.
The mighty, fuel-injected, aluminium V8 and Tremec six-speed manual gearbox are neatly packaged under the Beira's swooping bonnet, with a bespoke wiring harness and ECU, the latter being reprogrammed to allow the V8 to deliver close to 400bhp, combined with a dual-fuel capability.
Other key considerations involved significant attention to chassis dynamics, to ensure the car corners, steers and brakes effectively with the significant increase in engine output.
To satisfy this requirement, the fully independent suspension was entirely re-engineered by Breckland in association with KW Suspension, with uprated springs, dampers and bushes, plus thicker anti-roll bars front and rear. The result is slightly less suspension compliance, but a more focused ride and handling.
Stopping power is provided by impressive, 325mm ventilated discs on all four corners, the fronts being grasped by six-pot callipers, with four-pot at the rear, both from UK specialists, HiSpec.
Steering is via power-assisted rack and pinion, whilst the dramatically styled 18" cast alloy wheels are 8.5" front and 9.5" rears, shod with Bridgestone ultra-low profile tyres. Customer options include an upgrade to 19" diameter rims and tyres.
Exterior packaging
In order to make the Breckland Beira eye-catchingly different, save weight and liberate additional luggage space behind the passenger compartment, Breckland's design engineers have totally re-modelled both the front and rear body sections in-house, using lightweight composites instead of steel, the result being a highly distinctive nose section and pronounced fastback rear.
Bespoke interior
Breckland Beira features a custom-built interior, including electric windows, air conditioning, twin airbags - in the steering wheel and in the passenger dash - combined with clear, concise instrumentation, and hand-stitched leather/Alcantara seats and trim.
Affordability
The Breckland Beira is designed very much as a high-quality low-volume, sportscar for enthusiasts, and follows the highly appealing tradition of installing an easily available, American-designed V8 engine in a small, nimble, two-seater chassis to produce an exhilarating, high-performance package. Though using a tried and trusted concept, however, Beira is very much a vehicle for the 21st century, and accomplishes this with both environmental and fuel efficiency concerns in mind.
